Drawer Box Clamps
Our drawer box clamps square and hold an entire drawer or cabinet box at once with foot-pedal-activated pneumatic pressure — no corner clamps, no band clamps, no diagonal check by hand. Whether you're building boxes for kitchen cabinets, closet systems, or general cabinet work, this is the machine production shops move to once hand-clamping boxes becomes the bottleneck.
The JLT Drawer Box Clamp
JLT #190C Large Capacity Drawer & Box Clamp — $11,400.00
Vertical clamping columns square every corner of a drawer or box in one cycle, with up to 3,500 lbs of clamping pressure. Built on a robust steel frame for daily production use. View this drawer box clamp →
Drawer Box Clamp Machine: How It Works
Load the glued box against the machine's built-in squaring reference, step on the foot pedal, and the pneumatic clamps engage every side of the box at once — no hand-tightening, no walking around the box to check each corner. Release the pedal and the box comes out square and ready for fasteners or pins, in a fraction of the time hand clamps take.
A Drawer Box Assembly Clamp Built for Volume
Adjustable clamp columns mean a drawer box assembly clamp like this one isn't locked to a single box size — reposition the columns to match whatever drawer or box you're running next, and move straight to the next cycle instead of resetting a bench full of hand clamps between sizes.
Drawer Box Clamp for Cabinet Shops
A drawer box clamp for cabinet shops earns its keep on drawer boxes, but it works just as well squaring any cabinet box — uppers, lowers, tall pantry cabinets — anywhere a racked corner would keep slides or hinges from seating right. Pair it with our Cabinet Door Clamps to square the doors too.
Drawer Box Clamp for Kitchen Cabinet Production
Kitchens mean a lot of drawer boxes in a short window — banks of base cabinets, pull-out shelving, trash pull-outs. A drawer box clamp for kitchen cabinet runs keeps every box consistent, so drawer slides glide the same in box one and box thirty, without a hand-clamped box quietly running out of square partway through the job.
Drawer Box Clamp for Closet Systems
Closet systems live and die on drawer boxes that slide smoothly in tight, built-in spaces — a drawer box clamp for closet shops squares each box the same way it does for kitchen or cabinet work, so slides run true even in a custom-fit closet where there's no room to shim a crooked box.
Why Dedicated Drawer Clamps Beat Hand Clamps for Box Assembly
Hand-clamping a drawer box means corner clamps or band clamps on every joint, plus a diagonal check before the glue sets — and doing it all again on the next box. Dedicated drawer clamps square the entire box in one pneumatic cycle, which is where the real time savings come from once you're building more than a handful of boxes a week.
Complete Your Clamping Lineup
Drawer box clamps handle the boxes — pair one with our other clamping machines to cover the rest of your production line. Our Cabinet Door Clamps square up doors while adhesive sets, Panel Clamps handle wide cabinet sides and tops, and Door Clamps cover full-size entry and passage doors. See the complete lineup in our JLT Clamps collection.
FAQ: Drawer Box Clamps
Where can I find a drawer box clamp for sale?
Our JLT #190C Large Capacity Drawer & Box Clamp is available directly above — this drawer box clamp for sale ships ready to bolt into your production line, no assembly of the base frame required.
What size boxes does the drawer box clamp handle?
The clamp columns adjust to fit a range of drawer and cabinet box sizes, so you're not limited to a single fixed dimension between production runs.
Is this drawer box clamp machine only for kitchen cabinets?
No — it squares any drawer or cabinet box, whether it's headed into a kitchen, a closet system, a vanity, or general cabinet work. If it's a box that needs square corners, this machine handles it.
Ready to stop hand-clamping drawer boxes? View the JLT #190C Drawer Box Clamp, or call us at 800-698-1646 and we'll help you fit it into your production line.
Recently viewed
I hope this helps
"I have attached the pictures of how I use my panel flattener. I hope this helps."
JLT #180A-M2 Pneumatic Panel Flattener
Just what I needed
"Saw works great. Just what I needed. You may want to update the specs though. It says 110v but it’s 220v. I don’t think it will an 10” saw blade either. Haven’t tried but I don’t think it’s set up for one like it says. Ordering process was nice and easy. Thank you."
Castaly 12" Radial Arm Saw RS-612
Built for 24/7 Production
"Got the JLT #717C for our shop and it’s an absolute beast for narrow stile doors. The 2-second squaring cycle is legit—we’re easily pushing 100+ perfect doors a day now without stressing over glue joint alignment. Setup is super fast with the pin system, and the heavy-duty build takes daily abuse without losing accuracy."
JLT #717C Cabinet Door Clamp
Thanks for the service!
"Here are 2 pictures of the glue tank in our shop. I hesitated to send anything as it is not in its final place but perhaps it's good enough for you. We are using it for our drawer box station and assembly station. Thanks for the service!"
JLT Pressurized A8 Glue Tank for PVA Glue PIZ.9001
Purchased Machine for Partner
"I purchased this machine for our partner in China to use. We had some issues but we were able to get them fixed thanks to iron line tools."
Virutex CE53S Edge Lipping Planer for Perfect Flush Edges 5300199
I know this will meet my requirements
"haven't had a chance to use it but it looks like a well built product have a few projects down the road and I know this will meet my requirements. so hats off to your team! David"
Virutex TWOO AB200 Corded Dowel Jointer (120V) 7900799
Both Tools Work Great
"Both tools work great and are real time savers . The two tools that I received from your company were replacements for the exact same tools that I've used for the past years, I think its safe to say 20+ years. Extremely pleased with product and service."
Virutex AU93 Double Edge Trimmer And Scraper + RC21E Manual End Trimmer SET 2800086
Built for 24/7 Production
"This tool outperformed our previous setup by 40%. The build quality is pure steel."
JLT #812B Clamp Design
Quiet, Fast, and Totally Worth It
"Bought this California Air Tools compressor for the shop and it’s an absolute game changer. It’s incredibly quiet—you can actually have a normal conversation right next to it without yelling. It fills up fast, keeps up with all our nailers and blowguns with zero issues, and the oil-free pump means no maintenance. If you're tired of loud, annoying compressors ruining the vibe on your floor, grab this bad boy. Worth every penny."
Heavy Duty & Precise
"Brought this Jet 16" x 40" Engine Lathe into the shop recently and it’s an absolute beast. The 3-1/8" spindle bore is exactly what we needed for turning larger bar stock, and the geared head runs incredibly smooth from 25 all the way up to 1,800 RPM. It handles our heavy daily metalwork without breaking a sweat, and you can see how solid the build is right in the photo. If you need a reliable 3-phase lathe that holds tight tolerances all day, grab this bad boy. Worth every penny."
Jet Tools Lathe
Yep we got the cutter
"Yep we got the cutter. We haven’t used it, the project we purchased it for has ended. Shipping was fast and I had no issues getting my order"
Euroboor TCT 1" Depth Annular Cutter
The edge bender is working great!
"The edge bender is working great! I’ll keep you in mind next time I need something for my shop"
Virutex Hand-Held Hot Air Edgebander Set AG52F: AG98F + AU93 + RC21E 5200199
Thanks for checking in.
"I believe they are working well judging by none of the guys have said anything about them other than a thank you for swapping them out for them hahah. So thanks for checking in."
Virutex Wheel Cutter Set Of 2 Wheel Cutters For Laminate And Veneer 1527075Figured it out
"I had issues initially with the order but iron line tools helped me figure it out and sent me another Handheld Gluer. Very good service."
Virutex EM125T Handheld Gluer With Upper Roller 2500300