Best Stationary Wood Band Saws for Resawing Thick Lumber: Top Picks
Looking for the best stationary wood band saws for resawing thick lumber? This guide ranks the top machines by resaw capacity, motor power, weight, and price. Browse all of our wood band saws or read on to match a saw to your boards.
Quick Answer
The best stationary wood band saw for resawing thick lumber has at least 13 inches of resaw capacity, a strong motor, and a heavy frame. For boards up to 16 inches wide, our top pick is the Laguna 18|BX. For most home shops, a 14 inch saw with 13 inches of resaw is enough.
In This Guide
- What Makes a Band Saw Good at Resawing Thick Lumber
- Stationary Band Saw Resaw Capacity Guide
- Best Stationary Band Saw for Resawing Lumber: Top Picks
- Best Stationary Wood Band Saw for Resawing Thick Boards
- Best Floor Standing Band Saw for Resawing
- Best 17 Inch Band Saw for Resawing Lumber
- Blade and Setup Tips for Resawing
- How to Choose: A Resaw Buying Checklist
- Frequently Asked Questions
- Conclusion
Featured Wood Band Saws

Laguna
Laguna 18|BX Bandsaw MBAND18BX2203
$3,299.00
Industrial-grade 18 inch bandsaw with a 3 HP, 220V motor and a large 145 inch blade, listed for large resaw capacity. It is built for wide, thick boards. Make sure your shop has 220V power.

Laguna
Laguna 14|12 Bandsaw MBAND1412-175
$1,699.00
Precision resawing is listed as a strength of this 14 inch class bandsaw, which has a 1.75 HP TEFC motor on standard 110V power. Its pyramid-shaped spine adds rigidity and reduces vibration. A solid pick for home shops resawing moderate boards.

RIKON
RIKON 10-324TG 14" Bandsaw 1.50 HP Motor with Tool-Less Guides
$1,199.99
RIKON's 14 inch bandsaw has a 1-1/2 HP dual voltage motor, tool-less blade guides and a quick release tension lever. It also has a high work table height. Check the stated resaw height against your boards.

Laguna
From $2,149.00
Heavy-duty frame is the point of this evolution of the 14|12 platform, a one-piece frame in heavier gauge steel for rigidity and reduced vibration under load. That stability matters when a blade cuts through thick lumber. Compare it with the other 14 inch models.
What Makes a Band Saw Good at Resawing Thick Lumber
Resawing means cutting a board through its thickness to make thinner boards or veneer. It is the hardest job for a band saw, so a few specs matter more than anything else.
Resaw capacity
Resaw capacity is the tallest board the saw can cut on edge. It is measured from the table to the upper blade guide at its highest setting. Pick a saw with more capacity than your widest board.
Motor power
A strong motor keeps the blade moving through hard, thick wood. Popular Woodworking suggests about 1.5 to 2 HP for heavy cuts in hardwood and 3 HP or more for continuous production use. A motor that is too small will slow down and make the blade wander.
Frame, wheels, and weight
Heavy cast iron wheels act as flywheels and smooth out the cut. A stiff, heavy frame holds the blade tension needed for thick stock. In general, a heavier saw resaws straighter.
Blade guides and fence
Good guides keep the blade from twisting. A tall fence helps you guide a wide board. Look for guides that adjust without tools and lock firmly.
Stationary Band Saw Resaw Capacity Guide
Use this stationary band saw resaw capacity guide to match saw size to board width. Ranges are typical, and each model differs.
| Saw Size | Typical Resaw Capacity | Motor to Look For | Best For |
|---|---|---|---|
| 10 inch | Under 6 inches | Not built for resawing | Small parts and curves |
| 14 inch | About 12 to 13 inches | 1.5 to 2.5 HP | Home shops and most boards |
| 17-18 inch | 12 to 16 inches | 1.75 to 3 HP | Wide, thick lumber and veneer |
| 20 inch and larger | 14 inches or more | 2 HP or more | Slabs and production work |
Our models fit this chart. The 14 inch saws below resaw 13 inches. The 18 inch Laguna saws resaw 16 inches.
Best Stationary Band Saw for Resawing Lumber: Top Picks
These are the best stationary band saws for resawing lumber that we sell, from the most capacity to the least. All prices are current as of this post.
| Saw | Resaw | Motor | Weight | Price |
|---|---|---|---|---|
| Laguna 18|BX | 16 in | 3 HP, 220V | 410 lbs | $3,299.00 |
| Laguna 18|CX | 16 in | 1.75 HP, 110V | 480 lbs | $4,899.00 |
| Laguna 14|BX | 13 in | 1.75 HP (110V) or 2.5 HP (220V) | 260 to 270 lbs | From $2,149.00 |
| Laguna 14|12 | 13 in | 1.75 HP, 115/230V | 258 lbs | $1,699.00 |
| RIKON 10-324TG 14" Bandsaw 1.50 HP Motor with Tool-Less Guides | 13 in | 1.5 HP | 225 lbs | $1,199.99 |
1. Laguna 18|BX Bandsaw MBAND18BX2203 — $3,299.00
The best overall saw for resawing thick lumber. It has a 16 inch resaw capacity, a 3 HP motor, a 145 inch blade that takes up to 1-1/4 inch width, and a 10-point ceramic guide system. View more >
2. Laguna 18|CX Bandsaw MBAND18CX110175 — $4,899.00
The same 16 inch resaw capacity on standard 110V power. It adds a variable speed drive and a 1.75 HP motor. Pick it if you want a big resaw saw but only have 110V outlets. View more >
3. Laguna 14|BX Bandsaw — From $2,149.00
The best 14 inch saw for resawing. It has a 13 inch resaw capacity, a one-piece heavy-gauge steel frame, ceramic guides, and a disc brake. It comes in 110V and 220V versions. View more >
4. Laguna 14|12 Bandsaw MBAND1412-175 — $1,699.00
A strong value for resawing on 110V power. It has a 13 inch resaw capacity, a 1.75 HP motor, a pyramid-shaped spine for rigidity, and ceramic guides. View more >
5. RIKON 10-324TG 14" Bandsaw 1.50 HP Motor with Tool-Less Guides — $1,199.99
The budget pick. It has a 13 inch resaw capacity, a 1.5 HP motor, tool-less guides, and a 6 inch rip fence with a resaw bar. It is RIKON's most popular model. View more >
Best Stationary Wood Band Saw for Resawing Thick Boards
Looking for the best stationary wood band saw for resawing thick boards? Match the saw to your widest board. Boards up to 13 inches wide fit the 14 inch saws. Boards from 13 to 16 inches need an 18 inch saw like the Laguna 18|BX or 18|CX.
Thick lumber also needs power. For hard, wide boards, choose the 3 HP Laguna 18|BX. For softer wood or a few boards a year, a 14 inch saw with a sharp blade is enough.
Best Floor Standing Band Saw for Resawing
The best floor standing band saw for resawing is heavy, steady, and stays put. All five saws above stand on the floor. The 18 inch models are about 78 inches tall and weigh 410 to 480 lbs, so check your ceiling height and floor first.
A mobile base helps if you need to roll the saw out of the way. Plan room on both sides, since long boards need space to feed in and out.
Best 17 Inch Band Saw for Resawing Lumber
Many shops ask about the best 17 inch band saw for resawing lumber. The 17 to 18 inch class is the sweet spot for resawing. It has more capacity than a 14 inch saw without the cost of a 24 inch machine. We do not stock a 17 inch model, and our closest are the 18 inch Laguna 18|BX and 18|CX. Both resaw 16 inches.
Blade and Setup Tips for Resawing
The best saw still needs the right blade. Use a wide blade with few teeth per inch for thick stock, and keep it sharp. Our bandsaw blade selection guide explains width and tooth pitch. Also set the tension and guides before every resaw cut.
How to Choose: A Resaw Buying Checklist
- How wide is my widest board? That sets resaw capacity.
- Do I cut hardwood? Choose a stronger motor.
- Do I have 110V or 220V power?
- How much floor space and ceiling height do I have?
- What is my budget for the saw and blades?
Once you answer these, the right saw is easy to spot. Shop all our wood band saws to compare more models.
Match your answers to a saw. The Laguna 14|BX is the 14 inch pick with a 13 inch resaw capacity, the Laguna 14|12 gives a 13 inch resaw capacity on 110V power, and the Laguna 18|BX steps up to a 16 inch resaw capacity with a 3 HP motor. If you want a 16 inch resaw saw but only have 110V outlets, look at the Laguna 18|CX.
Frequently Asked Questions
What is the best band saw for resawing thick lumber?
For boards up to 16 inches wide, the Laguna 18|BX is our top pick. For most home shops, a 14 inch saw with 13 inches of resaw is enough.
How much resaw capacity do I need?
Choose a saw with more resaw capacity than your widest board. Many woodworkers are well served by 12 to 13 inches.
Is a 14 inch band saw good for resawing?
Yes, if your boards are 13 inches wide or less. Use a sharp, wide blade and a steady feed.
How much horsepower do I need to resaw?
Aim for about 1.5 to 2 HP for hardwoods, and 3 HP or more for heavy, daily resawing.
What size band saw is best for resawing?
The 17 to 18 inch class is the sweet spot. It adds capacity without the cost and size of a 24 inch machine.
What blade is best for resawing?
Use a wide blade with few teeth per inch. Wider blades track straighter in thick stock.
Can a small band saw resaw?
Only within its limit. A 10 inch saw has too little capacity for thick boards.
Do I need 220V to resaw thick lumber?
Not always. The Laguna 18|CX resaws 16 inches on 110V, while the Laguna 18|BX uses 220V.
Conclusion
The best stationary wood band saws for resawing thick lumber combine tall resaw capacity, a strong motor, and a heavy frame. Choose the 18 inch Laguna for wide boards, a 14 inch saw for most shops, or the RIKON 10-324TG on a budget. Ready to buy? Shop our wood band saws and call us if you want help choosing.
Safety and standards references: OSHA woodworking eTool: band saws and OSHA 1910.213 woodworking machinery requirements.
Related collections: Stationary Band Saws.
Related Reading
Resawing thick lumber: how much capacity?
Speak with our team about your board widths, motor power and frame weight to narrow down the right saw.


