How to Choose the Right Bandsaw Size for Your Needs: Band Saw Size Guide
Not sure what size band saw you need? This guide explains bandsaw sizes, band saw dimensions, and how to pick the right size for your projects and your shop. Browse our full range of wood band saws or read on to match a size to your work.
Quick Answer
What size band saw do I need? A 14 inch band saw fits most woodworkers, since it resaws boards up to about 13 inches wide. Choose a 10 inch saw for small shops and light curve work. Choose an 18 inch saw for wide boards, thick stock, and daily shop use.
In This Guide
- Band Saw Sizes Are Determined by Wheel Diameter
- Stationary Band Saw Size Guide for Woodworkers
- What Size Band Saw Do I Need?
- Band Saw Dimensions: Height and Weight
- 17 Inch vs 24 Inch Band Saw Comparison for Woodworking
- How to Choose the Right Size Stationary Band Saw: Our Top Picks
- Size Checklist Before You Buy
- Frequently Asked Questions
- Conclusion
Featured Wood Band Saws

RIKON
RIKON 10-3062S 10" 2 Speed Deluxe Bandsaw with Stand, and SP coated table
$649.99
Small shops and light curve work suit this 10 inch bandsaw, which has a 1/2 HP motor, 2 blade speeds and a stand with an SP coated table. Floor space is usually what sets your size limit here.

RIKON
RIKON 10-1414 14" 2 Speed Deluxe Bandsaw
$1,699.99
RIKON's 14 inch deluxe bandsaw has 2 speeds, an SP coated table and a 6 inch tall quick-adjust fence with micro-adjustment. The 14 inch class suits most woodworkers. Check ceiling height and stand footprint.

Laguna
Laguna 18|CX Bandsaw MBAND18CX110175
$4,899.00
Wide boards and thick material call for a saw like this 18 inch Laguna, which has a 1.75 HP motor and a mechanical variable speed drive. Variable speed lets you match the blade to the material. Confirm the 110V circuit and floor space.

RIKON
RIKON 10-342EVS 18" Bandsaw - 2.5HP Electronic Variable Speed
$3,499.99
An 18 inch bandsaw with a 2.5 HP electronic variable speed motor for wood or metal. Tool-less blade guides and a quick release tension lever speed up setup. Matched to shops with room and power for an 18 inch machine.
Band Saw Sizes Are Determined by Wheel Diameter
Band saw sizes are determined by the diameter of the two wheels the blade runs on. A 14 inch band saw has wheels of about 14 inches. The wheel size sets how deep the saw can cut from the blade to the frame, which is called throat capacity. Three numbers describe a band saw size.
Wheel diameter
This is the number in the name, such as a 10, 14, or 18 inch band saw. The saw can only cut about one wheel diameter at most. Heavy wheels also act like flywheels, which smooth the cut.
Throat capacity
Throat capacity is the distance from the blade to the frame. It sets the widest board you can cut and turn. On a 14 inch saw the throat is a little under the wheel size. For example, the Laguna 14|12 has a throat of 13-5/8 inches.
Resaw capacity
Resaw capacity is the tallest piece the saw can cut on edge, measured from the table to the upper guide. It matters if you slice boards into thin sheets. The RIKON 10-310 has a 4-5/8 inch resaw capacity. The Laguna 18|BX has 16 inches. Lee Valley notes that wider blades deflect less, and its author resaws with a 1/2 inch, 3 TPI hook-tooth blade.
Stationary Band Saw Size Guide for Woodworkers
Use this stationary band saw size guide for woodworkers as a starting point. Ranges are typical, and each model differs.
| Band Saw Size | Typical Resaw Height | Best For | Who It Suits |
|---|---|---|---|
| 10 inch | Under 6 inches | Small parts, curves, and craft work | Hobbyists with limited space |
| 12-14 inch | About 6 to 13 inches | Furniture parts, curves, and light resawing | Home shops and light pro use |
| 16-18 inch | 10 to 16 inches or more | Wide boards, thick stock, and bigger curves | Serious hobbyists and small shops |
| 20 inch and larger | 14 inches or more | Large slabs and production work | Pro and high-volume shops |
Our own models line up with this chart. The RIKON 10-310 is a 10 inch saw with a 4-5/8 inch resaw. The 14 inch RIKON 10-324TG and Laguna 14|BX both resaw 13 inches. The Laguna 18|BX and 18|CX resaw 16 inches.
What Size Band Saw Do I Need?
What size bandsaw do I need? Start with the work, not the saw. Ask what you cut most, then match the size.
Small projects and curves: 10 inch
A 10 inch saw handles scroll work, small boxes, and curved parts. It is light and takes little space. It is not meant for deep resawing.
Furniture and general shop work: 14 inch
A 14 inch band saw is the best fit for most shops. It cuts curves, tenons, and resaws boards up to 13 inches. Many woodworkers never need more than this.
Wide boards and production: 18 inch
An 18 inch saw adds a deeper throat, taller resaw height, and a stronger motor. Choose it if you cut thick lumber, make veneer, or run the saw every day. If you only resaw a few boards a year, you may not need the extra size.
Band Saw Dimensions: Height and Weight
Band saw dimensions matter as much as cutting size. A tall, heavy saw needs room to stand, a solid floor, and the right power. Here are the bandsaw dimensions for the models in this guide.
| Model | Size Class | Height | Weight | Price |
|---|---|---|---|---|
| RIKON 10-310 | 10 inch | 59 in | 59.5 lbs | $449.99 |
| RIKON 10-324TG | 14 inch | 75 in | 225 lbs | $1,199.99 |
| Laguna 14|BX | 14 inch | 70-1/4 in | 260 to 270 lbs | $2,149.00 |
| Laguna 18|BX MBAND18BX2203 | 18 inch | 77-3/4 in | 410 lbs | $3,299.00 |
| Laguna 18|CX MBAND18CX110175 | 18 inch | 77-3/4 in | 480 lbs | $4,899.00 |
Check three things before you buy. First, measure ceiling height, because 18 inch saws stand close to 78 inches. Second, plan floor space, and leave room to feed long boards in and out. Third, check your power. The Laguna 18|BX runs on 220V, while the 18|CX runs on 110V.
17 Inch vs 24 Inch Band Saw Comparison for Woodworking
Here is a 17 inch vs 24 inch band saw comparison for woodworking shops. 18 inch saws are the largest standard woodworking size listed here. For 24 inch saws, call us for options. These are general differences between the two classes.
| Factor | 17-18 Inch Band Saw | 24 Inch Band Saw |
|---|---|---|
| Resaw height | Often 12 to 16 inches | Often 14 inches or more |
| Motor | About 1.5 to 3 HP, usually single phase | Often larger, and may need three-phase power |
| Weight and space | About 400 to 500 lbs; fits a home shop | Much heavier; needs a strong floor and more room |
| Best for | Furniture, cabinets, and small production | Slabs, mills, and high-volume work |
| Cost | Low to mid thousands | Higher; often a pro purchase |
For most woodworkers, the 17 to 18 inch class is the upper end of what makes sense. A 24 inch saw pays off only when you cut large slabs or run production all day.
How to Choose the Right Size Stationary Band Saw: Our Top Picks
Here is how to choose the right size stationary band saw, from smallest to largest. Prices are current as of this post.
1. RIKON 10-310 10" Bandsaw with stand and miter gauge — $449.99
The entry size. It has a 10 inch wheel size, a 4-5/8 inch resaw capacity, and a steel stand, and it weighs only 59.5 lbs. Pick it for small parts, curves, and tight spaces. View more >
2. RIKON 10-324TG 14" Bandsaw 1.50 HP Motor with Tool-Less Guides — $1,199.99
RIKON's most popular model. It has a 1.5 HP motor, a 13 inch resaw capacity, tool-less guides, and a 6 inch rip fence with a resaw bar. It is a strong choice for a 14 inch band saw at a fair price. View more >
3. Laguna 14|BX Bandsaw — $2,149.00
A heavy-duty 14 inch saw with a one-piece steel frame. It offers a 13 inch resaw capacity, 1.75 HP on 110V or 2.5 HP on 220V, ceramic guides, and a disc brake. View more >
4. Laguna 18|BX Bandsaw MBAND18BX2203 — $3,299.00
The step up to 18 inches. It has an 18 inch throat, a 16 inch resaw capacity, and a 3 HP 220V motor. Choose it for thick lumber, veneer, and daily production. View more >
5. Laguna 18|CX Bandsaw MBAND18CX110175 — $4,899.00
The same big capacity on 110V power. It adds a variable speed drive, with a 1.75 HP motor, 16 inch resaw, and an 18-7/32 inch throat. It is the best pick if you want 18 inch size but only have standard outlets. View more >
Size Checklist Before You Buy
- What is the widest and tallest piece I cut? That sets throat and resaw height.
- How often do I resaw? Frequent resawing points to 14 inches or more.
- How much floor space and ceiling height do I have?
- Do I have 110V or 220V power?
- What is my budget for the saw, blades, and a mobile base?
Once you answer these, the right band saw size is easy to spot. Shop all our wood band saws to compare more models.
Frequently Asked Questions
What size band saw do I need for woodworking?
For most woodworkers, a 14 inch band saw is the best fit. It resaws up to about 13 inches and handles curves and furniture parts well.
What are band saw sizes determined by?
Band saw sizes are determined by wheel diameter. The wheel size sets throat capacity, the space from the blade to the frame.
Is a 14 inch band saw big enough?
Yes for most shops. Choose a larger saw only if you cut thick lumber or run the saw all day.
What is the difference between throat and resaw capacity?
Throat capacity is the width you can cut, from blade to frame. Resaw capacity is the height you can cut, from table to upper guide.
How big is a typical band saw?
A 14 inch saw stands about 70 to 75 inches tall and weighs 225 to 270 lbs. An 18 inch saw is about 78 inches tall and weighs 410 to 480 lbs.
Is a 17 inch or 24 inch band saw better?
A 17 to 18 inch saw suits most shops. A 24 inch saw is for slab cutting and production, and it needs more space and power.
Can a small band saw resaw thick boards?
It can resaw within its limit, with a sharp blade and a slow feed. A small saw also has less resaw height, so check the number before you buy.
Do I need 220V for a big band saw?
Not always. The Laguna 18|CX runs on 110V, while the Laguna 18|BX needs 220V.
Conclusion
The right bandsaw size depends on the work you do and the space you have. Go with a 10 inch saw for small jobs, a 14 inch saw for most shops, and an 18 inch saw for wide boards and heavy use. Ready to buy? Shop our wood band saws and call us if you want help choosing.
Safety and standards references: OSHA woodworking eTool: band saws and OSHA 1910.213 woodworking machinery requirements.
Related collections: Benchtop Band Saws, Stationary Band Saws and Table Saws.
Related Reading
10, 14 or 18 inch: which wheel size fits?
Phone our team with your projects and shop space, and we will help you pick the right machine.


