RIKON 19-1413 band saw blade, 142" x 3/4", 3 TPI hook tooth

Signs That It Is Time to Replace Your Band Saw Blade

Wondering if it is time to replace your band saw blade? Slow cuts, wavy edges, burn marks, and odd noises are the top warning signs. This guide shows how to spot each one and what to buy next. You can also browse all of our band saw blades when you are ready.

RIKON 19-1210 band saw blade coil, a replacement blade when your old blade shows signs of wear

Quick Answer

It is time to replace your band saw blade when it cuts slowly, leaves wavy or rough edges, burns the wood, drifts off the line, or has missing or chipped teeth. A blade that has cracked or snapped must be replaced right away.

Featured Bandsaw Blades

RIKON 19-1413 band saw blade, 142 inch x 3/4 inch, 3 TPI hook tooth

RIKON

RIKON 19-1413 142" x 3/4" 032 3 TPI Hook Blade

$39.99

Cutting slowly or drifting? A fresh 142 inch hook blade, 3/4 inch wide with 3 TPI, is the kind of replacement that restores a clean cut. Confirm the 142 inch length matches your saw before ordering.

View Product

RIKON 19-9911 99-3/4 inch x 3/8 inch band saw blade, .025 gauge, 4 TPI skip tooth.

RIKON

RIKON 19-9911 99-3/4" x 3/8" 025 4 TPI Skip Blade

$39.99

Made for saws that take a 99-3/4 inch blade, this skip tooth blade is 3/8 inch wide with 4 TPI. Swapping in a new one helps when you notice burn marks or wavy edges. Check your saw's blade length first.

View Product

RIKON 19-1804 162 inch x 3/4 inch x .032 x 3 TPI hook band saw blade

RIKON

RIKON 19-1804 162" x 3/4" x .032 x 3TPI Hook Blade

$49.99

Missing or chipped teeth mean the old blade is done, and this 162 inch hook blade is a 3/4 inch wide replacement with 3 TPI. It suits larger woodworking saws. Match the 162 inch length to your machine.

View Product

RIKON 19-7008 70-1/2 x 5/16 x 0.0157 x 6 TPI reg. band saw blade

RIKON

RIKON 19-7008 70-1/2 x 5/16 x 0.0157 x 6 TPI Reg. Blade

$24.99

Smaller saws that run a 70-1/2 inch blade can use this regular tooth replacement, 5/16 inch wide with 6 TPI. Replace a worn blade before it burns the wood. Check the blade length your saw takes first.

View Product

Signs It Is Time to Replace Your Band Saw Blade

A dull or damaged blade does not fail all at once. It gives clues first. Learn these signs and you can swap the blade before it ruins a board or hurts you.

The saw cuts slowly or you must push harder

This is the most common sign. A sharp blade pulls itself through the work. A worn blade makes you force the cut. Extra pressure also bends the blade and shortens its life.

Close view of a RIKON 19-1210 band saw blade with fresh sharp teeth

Cuts are wavy, rough, or crooked

Dull teeth tear instead of slice. You may see rough edges, a curved cut, or a cut that is thicker at one end. First check your guides and tension, since bad setup causes the same problem. If the setup is right, the blade is worn out.

RIKON 19-1603 wide band saw blade used for straight accurate cuts when a new blade is needed

Burn marks, smoke, or a hot blade

A dull blade rubs and builds heat. Burn marks on wood and a blade that is too hot to touch are clear warning signs. In metal, heat can harden the part and the blade edge.

Chipped, missing, or stripped teeth

Look at the blade with the saw unplugged. Missing teeth, chipped tips, or teeth that look rounded all mean the blade is done. A few missing teeth can cause the blade to grab and jam.

The blade drifts or will not track

If the cut keeps veering off the line even after you adjust the fence and guides, the teeth may be worn unevenly on one side. A blade with one worn side pulls the cut the same way every time.

Strange noise or more vibration

Squealing, grinding, or a new thump on each turn of the wheels can point to a damaged blade. The cause can be a cracked weld or a bent spot. According to Starrett, a whining or grinding sound is also a clue that something is wrong with the cut. Stop the saw and inspect the blade.

What a Broken Blade Is Telling You

Sometimes a blade breaks. How it breaks tells you why. Read the damage, fix the cause, then fit the new blade.

What You See Likely Cause What to Do
Cracks along the back edge of the blade Too much tension, wheels worn, or the blade is too wide for the wheel Check tension and wheel condition, then use a narrower blade
Clean, straight break Metal fatigue from age or a poor weld Replace the blade and check tension
Ragged, uneven break The blade was pinched or the work shifted Secure the workpiece and check the guides
Teeth stripped off in a patch Wrong tooth pitch or too much feed pressure Pick a finer pitch and ease the feed
Cracks at the back of the teeth The workpiece moved in the vise or table Clamp the work tight
Score marks on the sides Guides set too tight or too little coolant Reset the guides

These patterns follow the failure types that blade makers describe. A blade that has failed once should never go back on the saw.

RIKON 19-1212 1/2 inch hook blade on a coil, an easy replacement after a broken blade

Extra Warning Signs When Cutting Metal

Metal puts extra strain on a blade. Watch for two more signs when you cut steel or other metal.

Work hardening

If the cut surface turns very hard and the next blade will not bite, the first blade may have rubbed instead of cut. Use a steady feed and a blade with the right tooth count.

Chips welded to the teeth

Metal chips can stick to the teeth and form a rough coat. The blade then cuts poorly and burns. Use coolant and the right tooth pitch.

RIKON 19-1520 bi-metal band saw blade for cutting metal when the old blade shows chip welding

How to Make a Band Saw Blade Last Longer

A few habits help every blade last longer, in wood or metal.

  • Set blade tension to match the blade width.
  • Keep the guides close but not tight.
  • Use the right tooth pitch for the thickness of the work.
  • Let the blade cut. Do not force the feed.
  • Clean pitch and dust from the blade.
  • Release tension when the saw sits for a long time.

Not sure about width or pitch? Read our bandsaw blade selection guide before you order.

RIKON 19-1522 bi-metal variable pitch band saw blade that resists wear and lasts longer

Best Replacement Band Saw Blades

Once you decide to replace the blade, match the length to your saw first. Here are five of our top band saw blades.

Blade Size Teeth Best For Price
RIKON 19-1105 111" x 5/8" 025 4 TPI Regular Style Blade 111 in x 5/8 in 4 TPI regular General cutting $69.99
RIKON 19-1106 RESAW PRO 111" x 3/4" x .035" x 3 TPI Carbide Tipped PRO-CT Bandsaw Blade 111 in x 3/4 in 3 TPI carbide Resawing, longest life $149.99
RIKON 19-1102 111" x 3/8" 025 4 TPI Skip Blade 111 in x 3/8 in 4 TPI skip Soft and green wood $34.99
RIKON 19-1523 142" x 3/4" x 035 x 10/14TPI Var Metal Cutting Blade Bi-Metal 142 in x 3/4 in 10/14 TPI bi-metal Cutting metal $79.99
RIKON 19-1101 111" x 3/16" 025 10 TPI Reg Blade 111 in x 3/16 in 10 TPI regular Tight curves $55.99

1. RIKON 19-1105 111" x 5/8" 025 4 TPI Regular Style Blade — $69.99

A versatile 5/8 inch blade with 4 teeth per inch. A solid pick for general straight cuts and some curves. View more >

RIKON 19-1105 5/8 inch regular tooth band saw blade, a general purpose replacement blade

2. RIKON 19-1106 RESAW PRO 111" x 3/4" x .035" x 3 TPI Carbide Tipped PRO-CT Bandsaw Blade — $149.99

A carbide-tipped 3 TPI resaw blade, 3/4 inch wide. It costs more up front but stays sharp far longer on thick stock. View more >

RIKON 19-1106 Resaw Pro carbide tipped band saw blade for long blade life

3. RIKON 19-1102 111" x 3/8" 025 4 TPI Skip Blade — $34.99

A 3/8 inch skip tooth blade that clears sawdust well. A good pick for softwood and green wood. View more >

RIKON 19-1102 3/8 inch skip tooth band saw blade for clearing sawdust

4. RIKON 19-1523 142" x 3/4" x 035 x 10/14TPI Var Metal Cutting Blade Bi-Metal — $79.99

A bi-metal variable pitch blade, 142 inches long and 3/4 inch wide. Built for cutting metal. View more >

RIKON 19-1523 bi-metal variable pitch band saw blade for metal cutting

5. RIKON 19-1101 111" x 3/16" 025 10 TPI Reg Blade — $55.99

A narrow 3/16 inch blade with 10 teeth per inch. Use it for tight curves and detailed scrollwork. View more >

RIKON 19-1101 narrow 3/16 inch band saw blade for tight curves

How to Choose the Right Replacement Blade

Choose by length, then width, then tooth type. Length must match your saw exactly. Wider blades cut straighter, and narrower blades turn tighter curves. For more, see our guide to types of bandsaw blades.

RIKON 19-1215 1 inch hook band saw blade, a wide replacement option for straight cuts

Blade Replacement Checklist

  1. Unplug the saw before you touch the blade.
  2. Look for missing, chipped, or rounded teeth.
  3. Check for cracks near the weld and the back edge.
  4. Test a cut. Is it slow, wavy, or burnt?
  5. Confirm tension and guides before blaming the blade.
  6. Replace the blade if any problem remains.

Frequently Asked Questions

How do I know when to replace my band saw blade?

Replace it when cuts get slow, rough, wavy, or burnt, when teeth are missing or worn, or when the blade drifts off the line.

How often should you change a band saw blade?

It depends on use, material, and setup. Change it when it shows the signs above, not on a fixed date.

Can I sharpen a band saw blade?

Most woodworkers replace them. Sharpening is rarely worth it for narrow blades.

What causes a band saw blade to break?

Common causes are too much tension, a poor weld, metal fatigue, a pinched cut, or forcing the feed.

Why is my band saw blade burning the wood?

The blade is probably dull, or the feed is too slow. Replace the blade and check the guides.

Why is my band saw cutting crooked?

Worn teeth, loose guides, or low tension can all cause it. Fix the setup first, then replace the blade if it still drifts.

How long does a band saw blade last?

Life varies with material and care. Carbide-tipped blades last much longer than standard steel blades.

Is it safe to use a blade with a crack?

No. A cracked blade can snap while the saw runs. Replace it right away.

Conclusion

Slow cuts, rough edges, burn marks, missing teeth, and strange noises all mean it is time to replace your band saw blade. A fresh blade makes safer, cleaner cuts and saves wear on your saw. Browse our full range of band saw blades and call us if you need help matching a blade to your saw.

Safety and standards references: OSHA woodworking eTool: band saws and OSHA 1910.213 woodworking machinery requirements.

Explore the category: Band Saws.

Wavy edges and burn marks: time for a new blade?

Describe what you are seeing to our team and we will help you match the right replacement to your saw.

888-308-5580

Band saws, Guides