Best Metal Chop Saw for the Money: Top Metal Cutting Saws Reviewed

A metal cutting saw is one of the most useful tools you can add to a shop or jobsite — but only if you choose the right type for the work you're doing. Chop saws, circular saws, band saws, and hand saws each cut metal differently. Here's an honest breakdown of the best metal chop saws and metal cutting saws, with real performance data to help you choose the right one for your budget and your application.

Featured Metal Chop Saw

Evolution Power Tools Multi-Material Cutting Chop Saw With 14 in. Blade R355CPS front view showing the complete chop saw with durable base and precision cutting design.

Evolution Power Tools

Evolution Power Tools Multi-Material Cutting Chop Saw With 14 in. Blade R355CPS

$431.98

Single-blade versatility defines this 15 Amp corded chop saw, which uses a 14 inch TCT blade across a wide variety of materials with cold cut technology and high torque. For readers deciding between saw types, it suits shops that cut more than one material.

View Product

Evolution Power Tools Metal Cutting Circular Saw 7-1/4 in. Blade S185CCSL front view showcasing the complete metal cutting circular saw with magnesium base and ergonomic design.

Evolution Power Tools

Evolution Power Tools Metal Cutting Circular Saw 7-1/4 in. Blade S185CCSL

$237.15

Heavy-duty steel cutting in fabrication and steel construction is the target of this corded metal cutting circular saw, which has a 15 Amp motor and a 7-1/4 inch blade. It works when you take the saw to the steel instead of bringing steel to a chop saw.

View Product

Ellis Saw Ellis 3000 Mitre Band Saw - 13-1/2 inch Round Capacity, 2 HP, Variable Speed Shorter (still strong)

Ellis Saw

Ellis 3000 Mitre Band Saw - 13-1/2" Round Capacity, 2 HP, Variable Speed Shorter (still strong)

$6,795.00

Variable speed and a 2 HP motor come with this mitre band saw, which has a 13-1/2 inch round capacity. A band saw cuts differently from a chop saw, and this one suits shops that cut larger sections and adjust speed by material.

View Product

Evolution Power Tools Single Bevel Sliding Miter Saw R255SMS+ shown with a 10-inch TCT blade, sliding rail system, precision miter table, and heavy-duty base designed for accurate crosscuts, bevel cuts, and compound cuts.

Evolution Power Tools

Evolution Power Tools Single Bevel Sliding Miter Saw R255SMS+

$392.97

Laser guidance helps with angled work on this sliding compound miter saw, which has a 15 Amp Hi-Torque motor and a 10 inch multi-material TCT blade. Use it to see how a miter-style saw compares with a straight chop saw if you cut at angles often.

View Product

Types of Metal Cutting Saws

Before picking a model, it's worth understanding what each saw type does and where it excels:

  • Metal chop saws: Use a downward cutting motion to crosscut steel pipe, angle iron, solid bar, and structural steel. Most are equipped with either a carbide-tipped blade or an abrasive wheel. Fast, accurate, and well-suited to repetitive cuts in the shop. Best metal chop saws run on 15-amp motors and weigh 45–60+ lbs.
  • Metal-cutting circular saws: Handheld saws with carbide-tipped blades designed for steel and aluminum. Best for sheet metal, roofing panels, and framing components. The most portable type of powered metal saw, available in corded and cordless versions.
  • Portable band saws: Compact, handheld saws that use a continuous toothed blade for smooth, controlled cuts with minimal sparks. Ideal for cutting conduit, pipe, threaded rod, and structural shapes in tight spaces.
  • Workshop band saws: Stationary saws that offer greater capacity and precision for production metal cutting in a fixed shop.
  • Hand saws (hacksaws): Manual metal cutting with a tensioned replaceable blade. Slow but inexpensive, portable, and effective for light or occasional jobs.
CS Unitec Air Circular Saws — professional metal cutting circular saws designed for steel, aluminum, and non-ferrous metals; the circular saw type shown here uses a carbide-tipped or abrasive blade in a handheld form factor, corresponding to the metal-cutting circular saw entry in the types list above; air-powered versions are used where corded electric saws present a spark or electrical hazard

Best Metal Cutting Saws

DeWalt DCS383B 20V MAX XR 7-1/4″ Metal-Cutting Circular Saw

Best Overall Metal Cutting Saw — Best Cordless Metal Cutting Saw

The DeWalt DCS383B is the standout metal cutting saw for shops and jobsites that need fast, clean cuts through steel and aluminum without a stationary chop saw setup. In hands-on testing across steel siding, corrugated panels, and ¼-inch aluminum, it delivered spark-free cuts and clean edges that traditional metal saws can't match. The integrated chip collector is the key differentiator: it captures hot metal shards during the cut, dramatically reducing cleanup time and burn risk from airborne debris. At 13.35 lbs, it's not the lightest circular saw, but the balanced design makes it manageable for long cuts. The brushless motor maintains consistent power under load on a 20V battery, and blade changes are quick. If you're cutting metal regularly on a jobsite or need a saw that handles steel without sparks, this is the best metal cutting saw available for the money.

CS Unitec Dry Cut Circular Saw Blades — carbide-tipped dry-cut blades for metal cutting circular saws; these blades cut steel and aluminum without coolant, producing minimal heat and spark compared to abrasive grinding wheels; the carbide tip geometry shown here shears material cleanly, consistent with the spark-reduced cutting performance described for the DeWalt DCS383B above; blade quality determines cut finish and consumable cost in any metal-cutting circular saw

Evolution S355CPSL 14-In. Metal-Cutting Chop Saw

Best Metal Chop Saw for the Money — Best for Workshop

The Evolution S355CPSL is the best metal chop saw for the money for anyone doing serious, repetitive metal cutting in a workshop or permanent jobsite setup. Its 15-amp motor powers through 3/8-inch steel without hesitation, and the quick-release vise secures workpieces fast so you can move through a stack of cuts without fumbling with the clamp. The adjustable miter capacity and integrated chip deflector round out a package that's built for production work. At 60 lbs it's stationary-weight — this is a workshop chop saw, not a portable tool — but for fabricators, contractors, or any shop that cuts steel pipe, angle iron, or solid bar regularly, it delivers professional-grade results at a mid-range price. The carbide-tipped blade cuts dry (no coolant required), produces less heat than abrasive wheels, and leaves a cleaner edge that often needs no deburring.

CS Unitec 9414 Premium Super Dry Miter Cutter — a professional-grade dry-cut metal miter saw with carbide-tipped blade; like the Evolution S355CPSL reviewed above, this miter cutter uses a carbide blade to cut steel dry without abrasive grinding wheels, producing clean edges with minimal heat and burr; the miter capability allows angled cuts in steel pipe, tube, and structural shapes — the same production metal cutting application covered in the review section above

SkilSaw SPT62MTC Outlaw Worm Drive Metal Cutting Saw

Best Metal Saw for the Jobsite

The SkilSaw Outlaw pairs a 15-amp motor with worm drive gearing, delivering high torque and consistent cutting power through structural steel and heavy material that would bog down a conventional direct-drive saw. The left-side blade position gives you a direct sightline to the cut line — a meaningful advantage when cutting metal to a precise layout mark. The oversized chip tray manages debris during extended heavy cutting sessions so the workspace stays clear. At 15.5 lbs it's portable enough to take between jobsite locations. This is the best saw for cutting metal on a construction site where you need maximum motor performance in a handheld form factor.

CS Unitec Walk Behind Air Cut Off Saw CSR-160 — a heavy-duty air-powered walk-behind cut off saw for high-volume metal cutting in industrial and construction environments; where the SkilSaw Outlaw reviewed above is a handheld corded circular saw for jobsite portability, this walk-behind machine addresses applications requiring sustained production cutting of steel reinforcing bar, structural sections, and pipe without operator fatigue from holding a handheld saw; illustrates the range of metal cut-off tool form factors beyond the handheld type

Wen 94396 10-Amp Portable Band Saw

Best Band Saw for Cutting Metal — Best Value Metal Saw

The Wen 94396 portable band saw is the best-value metal saw for cutting pipe, conduit, threaded rod, and light structural shapes in tight or awkward spaces where a chop saw can't reach. Its 10-amp motor with variable speed control lets you match blade speed to the material — slower for harder metals, faster for aluminum and softer alloys. The 5-inch cutting capacity handles most standard pipe sizes, and the integrated chip blower keeps the cut line clear without a vacuum hookup. Band saw cuts produce minimal sparks and a smooth kerf that typically needs no cleanup. The Wen is the right choice when portability and access matter more than raw cutting speed.

CS Unitec JP901 Air Reciprocating Saw — a professional air-powered reciprocating saw for metal cutting in confined spaces and awkward positions; like the Wen portable band saw reviewed above, this saw prioritizes access and portability over fixed-station cutting capacity; the reciprocating blade action cuts pipe, conduit, threaded rod, and structural shapes where a circular saw or chop saw cannot reach; air-powered reciprocating saws are used where spark or electrical hazards prohibit corded or cordless electric tools

Klein Tools 702-12 High-Tension Hacksaw

Best Hand Saw for Cutting Metal

The Klein Tools hacksaw is the best hand saw for cutting metal when a powered saw is overkill, impractical, or unavailable. The high-tension frame adjusts blade tension for clean, controlled cuts; onboard blade storage keeps a spare accessible; and multiple blade mounting angles let you cut straight, flush, or at a jab angle depending on what the work requires. At 2 lbs it's the most portable metal-cutting option on this list, and it requires no power source or setup. For electricians, plumbers, and HVAC techs who occasionally need to notch conduit or trim threaded rod, the Klein Tools hacksaw is a reliable daily-carry tool.

CS Unitec Hacksaw Frame EX118A-395A — a professional heavy-duty hacksaw frame for manual metal cutting; like the Klein Tools 702-12 reviewed above, this hacksaw uses a tensioned replaceable blade in a rigid frame to cut metal pipe, bar stock, and structural shapes without power; the adjustable high-tension frame design shown here maintains blade tension through long cuts, reducing blade wander and improving cut straightness; professional-grade hacksaw frames are used where powered cutting tools are unavailable or impractical

Metal Cutting Saws Compared by Type and Capacity

The chop saw, circular saw and band saw from our store that the picks cover share one table. Start with the saw type, since each one cuts metal differently.

Model Price Key feature Best for
Evolution Power Tools Metal Cutting Chop Saw With 14 in. Mild Steel Blade S355CPSL $575.97 14 inch TCT blade, 15 Amp motor, 45 degree miter capacity Cold cutting of mild steel, tubing and angle iron
CS Unitec 14″ Metal Chop Saw – Premium Super Dry Cutter $1,455.50 14 inch dry cutter chop saw running on 110 V Dedicated chop saw work in a metal-cutting shop
Evolution Power Tools Metal Cutting Circular Saw S210CCS $358.76 15 Amp heavy-duty metal circular saw with chip collection Fast cuts in mild steel, stainless and aluminum
RIKON 15-400 4" x 6" Horizontal Metal Cutting Bandsaw $699.99 4 inch by 6 inch horizontal bandsaw with three blade speeds Cutting brass alloys up to stainless steel

Pick the saw type from the key feature column, then check blade size, motor or blade speed against the metal you cut so the machine suits your application.

Metal Chop Saw and Cutting Saw Picks

Compare the saws below from our store with the types the guide describes, from a chop saw to a circular saw and a bandsaw. Check which metals you cut and how thick they are before you choose.

1. Evolution Power Tools Metal Cutting Chop Saw With 14 in. Mild Steel Blade S355CPSL — $575.97

Cold cutting is the focus of this chop saw, with a 15 Amp motor, a 14 inch TCT blade and 45 degree miter capacity. It is made for burr-reduced cuts in mild steel, stainless steel, tubing, angle iron and channel. View more >

2. CS Unitec 14″ Metal Chop Saw – Premium Super Dry Cutter — $1,455.50

Dedicated chop saw users should look at this 14 inch model, listed at 110 V and sold as a super dry cutter. Check the configuration options on the product page before you order. View more >

3. Evolution Power Tools Metal Cutting Circular Saw S210CCS — $358.76

Carry the saw to the work with this metal cutting circular saw, which has a 15 Amp motor, an 8-1/4 inch TCT blade, a 3 inch cutting depth and integrated chip collection. It cuts mild steel, stainless steel and aluminum. View more >

4. RIKON 15-400 4" x 6" Horizontal Metal Cutting Bandsaw — $699.99

Small work that needs miters can go on this 4 inch by 6 inch horizontal bandsaw, with blade speeds of 80, 120 and 180 feet per minute for brass alloys up to stainless steel. Miter cuts reach 45 degrees. View more >

Quick Comparison: Key Specs

Model Type Power Weight Best For
DeWalt DCS383B Circular saw 20V cordless 13.35 lbs Sheet metal, jobsite portability
Evolution S355CPSL Chop saw 15A corded 60 lbs Workshop, steel pipe, angle iron
SkilSaw Outlaw Circular saw 15A corded 15.5 lbs Jobsite, heavy steel, portability
Wen 94396 Portable band saw 10A corded 14.5 lbs Pipe, conduit, tight spaces
Klein Tools 702-12 Hacksaw Manual 2 lbs Light cuts, no-power situations
CS Unitec Rail Guide Set for 12-5/8 inch Circular Saws — a precision cutting guide system that clamps to the workpiece and guides a circular saw blade along a straight or angled cut line; the rail guide system addresses one of the key limitations of handheld metal cutting circular saws compared to chop saws: freehand cuts drift on long stock; by locking the saw to a rail, operators achieve chop-saw-level straightness in a portable circular saw platform — relevant to the circular saw rows in the comparison table above

Best Metal Chop Saw for the Money

For pure chop saw performance, the Evolution S355CPSL is the best metal chop saw for the money at its price point. Here's what makes it earn that distinction:

  • Carbide blade, not abrasive wheel: Most budget chop saws use abrasive grinding wheels that generate excessive heat, produce flying sparks, and wear down quickly. The Evolution uses a carbide-tipped blade that cuts cold and dry, produces a cleaner kerf, and lasts far longer per blade than an abrasive wheel. You save on consumable blades and produce better cuts.
  • 15-amp motor: The full 15 amps on a dedicated circuit powers through 3/8-inch solid steel without the motor loading up. Entry-level chop saws run 12–13 amps and bog down on thicker stock.
  • Quick-release vise: Production work requires clamping and releasing material quickly. The quick-release mechanism cuts setup time per cut significantly versus a threaded vise.
  • Adjustable miter capacity: Angles other than 90° are a reality in fabrication and installation work. The rotating fence handles the geometry without buying a dedicated miter saw.
  • Integrated chip deflector: Hot metal chips are a real hazard. The built-in deflector directs debris away from the operator.
CS Unitec Hacksaw Blades Heavy Duty FAST-CUT and Standard — professional replacement hacksaw blades in heavy-duty FAST-CUT and standard tooth configurations; blade selection directly affects cut speed, blade life, and edge finish in hand saw metal cutting; the FAST-CUT configuration uses an aggressive tooth geometry for faster material removal in mild steel, while the standard configuration extends blade life on harder alloys; consistent with the blade selection topic in the chop saw section above, where carbide-tipped blades are distinguished from abrasive wheels by cut speed and consumable cost

Note on weight: At 60 lbs, the Evolution S355CPSL is a stationary shop tool. If you need to cut metal on a jobsite or move the saw between locations frequently, the SkilSaw Outlaw or DeWalt DCS383B are the better portable choices. Chop saws trade portability for cutting capacity and stability.

CS Unitec Air Reciprocating Saw CS75 — a compact air-powered reciprocating saw for metal cutting in environments where a 60-lb chop saw is impractical; the callout above notes that chop saws trade portability for cutting capacity and stability; the CS75 shown here represents the opposite end of that tradeoff — a lightweight, portable reciprocating saw that handles pipe, conduit, and bar stock in any position at the cost of the per-cut throughput a stationary chop saw delivers; portable air reciprocating saws are standard in trades where jobsite access limits the use of fixed-station cutting equipment

What to Look for in a Metal Cutting Saw

Blade Type: Carbide vs. Abrasive

This is the single most important decision when buying a metal chop saw. Abrasive wheels cut by grinding — they generate intense heat, throw sparks across the workspace, and wear down quickly. Carbide-tipped blades cut by shearing, like a wood saw blade, but with geometry and tooth geometry engineered for metal. Carbide blades run cooler, produce a cleaner edge, last longer, and are dramatically safer in terms of debris. If a metal chop saw's product listing doesn't specify carbide, assume it uses an abrasive wheel and plan your workstation accordingly.

CS Unitec Hydraulic Circular Saws — high-power hydraulic-driven circular saws for heavy-duty metal cutting in industrial environments; the blade type section above explains that carbide-tipped blades cut dry and cool while abrasive wheels generate heat and sparks; hydraulic-powered saws shown here deliver sustained cutting power without the motor limitations of corded electric saws, making them the preferred choice for high-volume structural steel cutting where abrasive-wheel heat buildup would degrade cut quality; the circular blade type used on these hydraulic saws is directly relevant to the blade type discussion above

Motor Power

For corded saws, 15 amps is the maximum available from a standard 120V circuit and the target for a serious metal chop saw. Portable saws typically run 10–12 amps, which is adequate for thinner material. Cordless metal saws use 18V–20V batteries; a brushless motor with a 5.0 Ah battery pack comes closest to matching corded performance for intermittent cutting. For sustained high-volume metal cutting, a corded 15-amp saw will always outperform cordless.

CS Unitec CHEETAH Air Reciprocating Saw — a high-speed professional air reciprocating saw for sustained metal cutting at production rates; the motor power section above notes that for sustained high-volume metal cutting a corded 15-amp saw outperforms cordless; air-powered reciprocating saws like the CHEETAH shown here achieve equivalent or greater sustained output than electric motors by drawing from a compressed air supply with no battery depletion or motor thermal limits — the industrial equivalent of choosing a high-amperage corded saw for production work, as described above

Vise and Clamping

A chop saw's vise determines how fast you can work. A quick-release mechanism lets you open, position, and clamp workpieces in seconds. A threaded vise slows every cut. For production work, the quality and speed of the vise matters as much as the motor. Also confirm the jaw opening is large enough for your stock size before buying.

CS Unitec Reciprocating Saw Clamps — workholding clamps designed to secure pipe, tube, and bar stock for reciprocating saw metal cutting; the vise and clamping section above explains that a chop saw vise determines how fast production cutting can proceed and that jaw opening must accommodate the stock size; dedicated saw clamps shown here serve the same function for reciprocating saw applications — securing the workpiece against blade reaction force during the cut, eliminating hand-holding risk described in the safety section, and enabling consistent cut angles on round stock

Portability vs. Capacity

Chop saws are workshop tools: heavy, stable, and accurate. Circular saws and band saws are jobsite tools: portable, flexible, and versatile. Decide where you'll use the saw before you decide which type to buy. Buying a 60-lb chop saw for a jobsite where you'll be carrying it up stairs is the wrong tool for the application, however good the saw is.

Debris Management

Hot metal chips and sparks are a significant hazard. Look for integrated chip trays (chop saws), chip collectors (circular saws), and chip blowers (band saws) to manage debris during the cut. These features reduce cleanup, protect nearby materials from heat damage, and lower injury risk from airborne metal chips.

Safety Tips for Metal Cutting Saws

  • Read the manufacturer's instructions before first use — particularly the startup, shutdown, and emergency stop procedures for your specific model.
  • Wear protective eyewear and ear protection. Metal cutting generates both debris and significant noise. Safety glasses alone are insufficient; use impact-rated goggles or a full face shield for metal saws.
  • Wear heat-resistant gloves. Cut metal edges are sharp and can retain heat for longer than they appear to.
  • Confirm all guards are in place before starting the saw. Never remove a blade guard for better sightlines.
  • Securely clamp all workpieces before cutting. Never hold material by hand against a metal saw blade. A caught workpiece can be thrown with enough force to cause serious injury.
  • Keep flammable materials away from the work area. Even spark-reduced saws produce some metal chips that retain heat.
  • Allow the blade to reach full speed before contacting the material, and let it stop completely before setting the saw down or changing blades.

Frequently Asked Questions

What is the best metal chop saw for the money?

The Evolution S355CPSL 14-inch metal chop saw delivers the best value for money in a stationary chop saw. Its 15-amp motor, carbide-tipped blade, quick-release vise, and adjustable miter capacity give it the capabilities of far more expensive saws at a mid-range price. For a portable metal cutting saw, the DeWalt DCS383B 20V cordless circular saw is the best overall value when you need to cut on a jobsite.

What is the best saw for cutting metal?

The best saw for cutting metal depends on the application. For a permanent workshop setup with repetitive straight cuts in steel pipe, angle iron, or bar stock, a metal chop saw is the best choice. For cutting sheet metal, roofing panels, and framing components on a jobsite, a metal-cutting circular saw is better. For pipe, conduit, and tight-space cuts, a portable band saw is the right tool. Hand saws cover light or occasional work.

What is a saw that cuts metal called?

Several saw types cut metal: a metal chop saw (or metal cut-off saw) uses a downward action for straight crosscuts; a metal-cutting circular saw uses a rotating carbide blade for sheet metal and panels; a metal-cutting band saw uses a continuous blade loop for pipe and structural shapes; and a hacksaw is the manual equivalent for light work. The general category is "metal-cutting saw" or "metal saw."

Can I use a regular circular saw to cut metal?

A standard wood-cutting circular saw can cut thin sheet metal with a dedicated ferrous metal blade, but it is not designed for metal cutting and carries real risks: the higher tooth counts and blade geometry optimized for wood produce excessive heat and debris in metal, the saw's chip management system (or lack of one) isn't built for hot metal shards, and the motor may overheat on sustained cuts. For anything beyond occasional thin sheet metal cuts, a saw designed specifically for metal cutting is the right choice.

What is the best cordless metal cutting saw?

The DeWalt DCS383B 20V MAX XR is the best cordless metal cutting saw. Its brushless motor, spark-reduced cutting performance, and integrated chip collector make it genuinely better than retrofitting a wood saw for metal work — and the 20V battery platform means it shares batteries with the rest of your DeWalt cordless lineup. For users on a different platform, Milwaukee and Makita both offer 18V metal-cutting circular saws with comparable performance.

What is the best hand saw for cutting metal?

The Klein Tools high-tension hacksaw is the best hand saw for cutting metal. Its adjustable high-tension frame keeps the blade taut for cleaner, faster cuts than low-tension hacksaws, the onboard blade storage is practical, and multiple mounting angles cover flush, jab, and straight cutting orientations. For plumbers, electricians, and HVAC techs who need to cut conduit or pipe without a power tool, it's a reliable daily-use tool at a low price.

Conclusion

Chop saws, circular saws, band saws and hand saws each cut metal differently, so choose the metal-cutting saw that fits your work and your budget. Looking for the right fit? Start with our metal chop saws and narrow it down by size and price.

Safety and standards references: OSHA 1910.243 guarding of portable powered tools and OSHA 1910.212 general requirements for all machines.

Explore the category: Metalworking. Related collections: Abrasive Chop Saws and Cut Off Saw.

Shop Band Saws at Iron Line Tools

Ellis 1600 Mitre Band Saw vertical cutting position with workpiece on table

Ellis 1600 Mitre Band Saw

Price: $5,299 | Type: Mitre Band Saw

The Ellis 1600 is a professional-grade horizontal/vertical mitre band saw with 10" round cutting capacity. Precision miter cuts from 0-60 degrees, heavy-duty USA-made construction.

Shop the Ellis 1600 Mitre Band Saw →

Ellis 2000 Mitre Band Saw angled cutting position for mitre cuts

Ellis 2000 Mitre Band Saw

Price: $6,545 | Type: Mitre Band Saw

The Ellis 2000 delivers 17" round cutting capacity with precision miter capability from 0-60 degrees. A heavy-duty horizontal/vertical band saw for high-production metal and structural fabrication shops.

Shop the Ellis 2000 Mitre Band Saw →

Which metal-cutting saw suits your work and budget?

Ask us to compare chop, circular, band and hand saws against the cuts you make in your shop.

888-308-5580

Also browse: Band Saws

Buying guides, Power saws