Virutex Router For Fitting Hinges FR129VB (120V) 2900815 hinge routing machine shown in full view with adjustable base and precision guide system for door hinge installation.
Virutex Router For Fitting Hinges FR129VB (120V) 2900815 in use routing hinge recess on door frame demonstrating precise alignment and clean cuts.
Virutex Router For Fitting Hinges FR129VB (120V) 2900815 mounted vertically on door showing accurate hinge placement and stable operation.
Virutex Router For Fitting Hinges FR129VB (120V) 2900815 performing hinge mortising on wooden surface with guide system for consistent results.
Virutex Router For Fitting Hinges FR129VB (120V) 2900815 applied to cabinet hinge installation showing precision routing for hardware fitting.
Virutex Router For Fitting Hinges FR129VB (120V) 2900815 hinge close-up detail showing clean mortise finish and professional installation quality.
Roll over image to zoom in Click on image to zoom
Virutex Router For Fitting Hinges FR129VB (120V) 2900815 hinge routing machine shown in full view with adjustable base and precision guide system for door hinge installation. Virutex Router For Fitting Hinges FR129VB (120V) 2900815 product display highlighting vertical routing capability and hinge mortising setup.Virutex Router For Fitting Hinges FR129VB (120V) 2900815 in use routing hinge recess on door frame demonstrating precise alignment and clean cuts.Virutex Router For Fitting Hinges FR129VB (120V) 2900815 mounted vertically on door showing accurate hinge placement and stable operation.Virutex Router For Fitting Hinges FR129VB (120V) 2900815 performing hinge mortising on wooden surface with guide system for consistent results.Virutex Router For Fitting Hinges FR129VB (120V) 2900815 applied to cabinet hinge installation showing precision routing for hardware fitting.Virutex Router For Fitting Hinges FR129VB (120V) 2900815 hinge close-up detail showing clean mortise finish and professional installation quality.

Virutex Router For Fitting Hinges FR129VB (120V) 2900815

★★★★★
Iron Line Verified
Authorized Dealer: Virutex
Official Partner
IN STOCK & RECEIVE IN 3-5 DAYS
SKU: Router FR129VB 2900815

Quick Specs

  • Power Infrastructure: 120V / 1000W. Operates on standard circuits; no specialized electrical drops required.
  • Tooling & Consumables: Standard 1/4" chuck. Ships with a 1/2" carbide bit. Replacement bits are standard and easy to source.
  • Workflow & Training: Zero-measurement template system. Highly repeatable process lowers the training barrier for technicians and standardizes door production time.
  • Asset Protection: Non-marring clamp vises (up to 10" capacity) protect pre-finished commercial doors and frames from surface damage, eliminating rework.
  • Safety & Environment: Electronic speed regulation prevents motor stall under load. Ensure standard shop-vac integration for dust compliance.
Price:
$845.00
Financing as low as ~$14 / month (60 mo. terms) Estimate your payment
×

We Cover Sales Tax Excluding (Illinois)
Section 179
Tax Savings
Save up to $177.45 on this equipment Estimate Your Tax Deduction
Calculate Savings →
×

Section 179 Calculator

See your true out-of-pocket cost after 2026 tax deductions.

Purchase Price: $0.00
Section 179 Write-Off: $0.00
Estimated Cash Savings: $0.00
True Out-Of-Pocket Cost: $0.00
Commercial Buyer?

Unlock volume pricing and dedicated facility support with Trade Accounts
(Requires minimum of 2+ items)

Estimated Delivery Timeline

Order Placed

Ships Out

Delivered

*Please Note: This timeline is an estimate. Certain products may require an additional 1 week for manufacturing. Please speak with your sales rep, Matthew, for official details and confirmation before placing your order.

CALL US FOR THE MOST ACCURATE AND COMPETITIVE LTL SHIPPING RATE, (888) 308-5580

Get Questions Answered

Fast & Free
Experience: 20+ Years B2B • Origin: US-Based Support
EXPRESS SHIPPING

EXPRESS SHIPPING

Most orders process in 1-3 days. Yes, even if it weights 400lb

Hassle-Free Returns

Hassle-Free Returns

No restocking fees. Ever.

Manufacturer Warranty

Manufacturer Warranty

Fully backed by the brands you trust.

Dedicated Rep Mathew

Dedicated Rep Mathew

Speak to a US-Based Equipment Specialist: (888) 308-5580

Flexible Financing

Flexible Financing

Get Upto 60 Months Financing

Key Information

  • Order Cutoff Time: 2:00 PM EST
  • Order Handling Time: 1–3 business days (Monday–Friday)
  • Transit Time: 1–7 business days (Monday–Friday)
  • Total Estimated Delivery Time: 3–11 business days (Monday–Friday)
  • Shipping Availability: Free Shipping On Most Items In The Contiguous United States only

    For more information Click Here
×

Engineering Toolsuite

Industrial calculations for facility planning and financial justification.

1. Facility & Utility Sizing

Airflow, thermal load, and suction requirements.

→

2. Safety & OSHA Compliance

Noise limits, combustible dust, and shop layout safety.

→

3. CAPEX & Strategic Analysis

Section 179, Labor ROI, and downtime revenue loss.

→

Facility & Utility Sizing

Airflow Sizer (CFM)

Calculate ventilation for cooling and air quality.

Dehumidification (PPD)

Determine moisture removal for curing or climate control.

Dust Collection (CFM)

Required suction for material extraction.

Machine Thermal Load

Size cooling based on machine BTU output.

Safety & OSHA Compliance

OSHA Noise Exposure

Calculate daily noise dose and legal limits.

Combustible Velocity

Required FPM to move materials safely through ducting.

Heat Stress Index

Workplace danger zones based on heat and humidity.

Safe Machine Spacing

Physical footprint including material handling clearance.

CAPEX & Strategic Analysis

Section 179 Savings

Immediate tax deduction for equipment purchase.

Cost of Inaction

Revenue bleed from legacy equipment downtime.

Labor ROI (Payback)

Months until machine labor savings covers the cost.

Material Waste Savings

Monthly profit increase from scrap reduction.

Airflow Sizer

Recommended Airflow:

0 CFM

Dehumidification

Moisture Removal:

0 PPD

Dust Collection

Min. Suction Needed:

0 CFM

Machine Thermal Load

Heat Output:

0 BTU/hr

Cooling: 0 Tons

OSHA Noise Dose

Daily OSHA Dose:

0%

Duct Velocity

Required Volume:

0 CFM

Heat Stress Index

Feels Like:

0 °F

Safe Footprint

Safe Shop Area:

0 Sq Ft

Section 179 Savings

Tax Savings:

$0

Net Cost: $0

Cost of Inaction

Monthly Loss:

$0

Labor ROI

Payback Period:

0 Months

Waste Reduction

Monthly Savings:

$0

Request Expert Consultation

Our tool specialists are ready to help you find the perfect solution for your specific application.

Your information is secure and will only be used to respond to your inquiry.

CAPITAL ACCESS

EQUIPMENT FINANCING

AVAILABLE

Preserve cash flow with up to 60 month financing.

Recently viewed

What a privilege to help great companies #getworkdone:

OUTFITTING FACILITIES FROM COAST TO COAST

Iron Line Tools provides the critical equipment that industrial and manufacturing operations rely on to execute at the highest level.

Job Site Proven

Trusted by Facilities and manufacturing centers

Mike Yaross Field Verified

Just what I needed

"Saw works great. Just what I needed. You may want to update the specs though. It says 110v but it’s 220v. I don’t think it will an 10” saw blade either. Haven’t tried but I don’t think it’s set up for one like it says. Ordering process was nice and easy. Thank you."

Castaly 12" Radial Arm Saw RS-612
FRANCISCO, Shop Manager Field Verified

Built for 24/7 Production

"Got the JLT #717C for our shop and it’s an absolute beast for narrow stile doors. The 2-second squaring cycle is legit—we’re easily pushing 100+ perfect doors a day now without stressing over glue joint alignment. Setup is super fast with the pin system, and the heavy-duty build takes daily abuse without losing accuracy."

JLT #717C Cabinet Door Clamp
California Air Tools 10020DCAD-22060 2.0 Hp Ultra Quiet Oil-Free 10 Gallon Air Compressor angled view with dual piston pump
Mike T., Shop Manager Field Verified

Quiet, Fast, and Totally Worth It

"Bought this California Air Tools compressor for the shop and it’s an absolute game changer. It’s incredibly quiet—you can actually have a normal conversation right next to it without yelling. It fills up fast, keeps up with all our nailers and blowguns with zero issues, and the oil-free pump means no maintenance. If you're tired of loud, annoying compressors ruining the vibe on your floor, grab this bad boy. Worth every penny."

Jet 16" x 40" Engine Lathe: Geared Head, 230 V 3 Phase, 3-1/8" Spindle Bore Dia, 25 to 1,800 RPM JT9-321381
Mark D. | Machine Shop Foreman Field Verified

Heavy Duty & Precise

"Brought this Jet 16" x 40" Engine Lathe into the shop recently and it’s an absolute beast. The 3-1/8" spindle bore is exactly what we needed for turning larger bar stock, and the geared head runs incredibly smooth from 25 all the way up to 1,800 RPM. It handles our heavy daily metalwork without breaking a sweat, and you can see how solid the build is right in the photo. If you need a reliable 3-phase lathe that holds tight tolerances all day, grab this bad boy. Worth every penny."

Jet Tools Lathe
Gedalya Glauber Field Verified

Purchased Machine for Partner

"I purchased this machine for our partner in China to use. We had some issues but we were able to get them fixed thanks to iron line tools."

Virutex CE53S Edge Lipping Planer for Perfect Flush Edges 5300199
View Full Case Studies
Field Reports

Virutex Router For Fitting Hinges FR129VB (120V) 2900815 Reviews