Commercial Buyer?
Unlock volume pricing and dedicated facility support with Trade Accounts
(Requires minimum of 2+ items)
Estimated Delivery Timeline
Get Questions Answered
Fast & Free
Experience: 20+ Years B2B
•
Origin: US-Based Support
EXPRESS SHIPPING
Most orders process in 1-3 days. Yes, even if it weights 400lb
Hassle-Free Returns
No restocking fees. Ever.
Manufacturer Warranty
Fully backed by the brands you trust.
Dedicated Rep Mathew
Speak to a US-Based Equipment Specialist: (888) 308-5580
Flexible Financing
Get Upto 60 Months Financing
Key Information
- Order Cutoff Time: 2:00 PM EST
- Order Handling Time: 1–3 business days (Monday–Friday)
- Transit Time: 1–7 business days (Monday–Friday)
- Total Estimated Delivery Time: 3–11 business days (Monday–Friday)
- Shipping Availability: Free Shipping On Most Items In The Contiguous United States only
For more information Click Here
Request Expert Consultation
Our tool specialists are ready to help you find the perfect solution for your specific application.
CAPITAL ACCESS
EQUIPMENT FINANCING
AVAILABLE
Preserve cash flow with up to 60 month financing.
Frequently Asked Questions
The pre-milling unit uses two diamond cutters rotating in opposite directions to shave a small amount of material (usually 0.5mm to 2.0mm) off the edge of the panel. This removes "step marks" from the saw blade and eliminates any swelling from humidity, ensuring a zero-joint appearance.
The CBC.TPM is designed to work with edgebanding thickness ranging from 0.4mm to 3mm. Note: When using 3mm PVC, ensure the machine's temperature and pressure rollers are adjusted to account for the increased stiffness of the material.
No. The CBC.TPM is a stationary, straight-line edgebander. It is designed for rectangular panels. For curved work, you would require a manual contour edgebander like the Maksiwa CBC.E.
Most versions of the CBC.TPM require a 220V, Single Phase connection. Because it houses heaters, motors for the cutters, and a conveyor system, it is essential to have a dedicated circuit to prevent breakers from tripping during the initial heat-up phase.
On average, the glue pot takes 15 to 20 minutes to reach the standard working temperature (usually set between 180°C and 210°C, depending on the glue type).
The machine performs a complete sequence after the tape is applied: End Trimming: Cuts the excess tape at the front and back of the panel. Top and Bottom Trimming: Flushes the tape to the panel faces. Scraping: Removes any "chatter" marks from the trimmers. Buffing: Polishes the edge for a smooth, finished look.
Recently viewed
Frequently Asked Questions for Maksiwa
The pre-milling unit uses two diamond cutters rotating in opposite directions to shave a small amount of material (usually 0.5mm to 2.0mm) off the edge of the panel. This removes "step marks" from the saw blade and eliminates any swelling from humidity, ensuring a zero-joint appearance.
The CBC.TPM is designed to work with edgebanding thickness ranging from 0.4mm to 3mm. Note: When using 3mm PVC, ensure the machine's temperature and pressure rollers are adjusted to account for the increased stiffness of the material.
No. The CBC.TPM is a stationary, straight-line edgebander. It is designed for rectangular panels. For curved work, you would require a manual contour edgebander like the Maksiwa CBC.E.
Most versions of the CBC.TPM require a 220V, Single Phase connection. Because it houses heaters, motors for the cutters, and a conveyor system, it is essential to have a dedicated circuit to prevent breakers from tripping during the initial heat-up phase.
On average, the glue pot takes 15 to 20 minutes to reach the standard working temperature (usually set between 180°C and 210°C, depending on the glue type).
The machine performs a complete sequence after the tape is applied: End Trimming: Cuts the excess tape at the front and back of the panel. Top and Bottom Trimming: Flushes the tape to the panel faces. Scraping: Removes any "chatter" marks from the trimmers. Buffing: Polishes the edge for a smooth, finished look.
Field Reports