How deep does a beam saw cut

How Deep Does a Beam Saw Cut?

"How deep can a beam saw cut" is one of those questions with an answer that surprises people — it isn't simply a matter of "the more expensive the machine, the deeper it cuts." Here's exactly what determines a beam saw's maximum depth of cut, how that spec compares across a real lineup of models, and what it actually means for the material you're planning to run. (Note: this is about the industrial panel-sizing beam saw — the CNC machine cabinet shops use to break down full sheets — not the nickname some brands use for large hand-held circular saws.)

Featured Beam Saws

Castaly Rear_section_of_the_10_CNC_Gripper_Panel_Beam_Saw_TS-P330_displaying_gripper_system_and_linear_guide_rails Castaly Side profile of the 10 inch CNC Gripper Panel Beam Saw TS-P330 highlighting heavy-duty frame construction and support tables

Castaly

Castaly 10" CNC Gripper Panel Beam Saw TS-P330

$81,290.00

Castaly's TS-P330 pairs CNC control with an automated gripper feed for panels up to 126 inch long. Open its product page to read the depth of cut and compare it with your material thickness before ordering.

View Product

Castaly 10 inch Rear Load CNC Panel Saw TS-P330R control interface and CNC programming display panel

Castaly

Castaly 10"Rear Load CNC Panel Saw TS-P330R

$153,890.00

Rear loading and a servo-driven gripper define the TS-P330R, a CNC panel saw built for throughput. Depth of cut varies by model, so read this one's listed spec against the thickest stock you cut.

View Product

Castaly 10 inch Auto Panel Beam Saw TS-P10A industrial automatic beam saw with precision sliding carriage and control panel

Castaly

Castaly 10"Auto Panel Beam Saw TS-P10A

$34,990.00

Heavy-duty and automatic, this 10 inch beam saw uses chrome-plated guide rods and a synchronized pressure beam. It is a practical point of comparison for depth of cut among the lineup. Check its listed depth against your stock.

View Product

What Determines a Beam Saw's Depth of Cut?

A beam saw's maximum depth of cut — sometimes listed as "maximum cutting thickness" — comes down mainly to the main blade's diameter and how far it can drop below the table surface. A larger-diameter blade has more usable cutting edge below its arbor, so it can plunge deeper into the material before the blade's own body runs out of clearance. Motor horsepower affects how well a saw powers through dense or laminated material at a given depth, but it doesn't by itself increase how deep the blade can reach — a 25 HP motor spinning a 355 mm blade still tops out at the same physical depth as a 10 HP motor spinning that same blade. The scoring blade that runs ahead of the main blade on most models only pre-scores a shallow groove in the underside of the panel and isn't part of the depth-of-cut spec — it's there to prevent chip-out, not to add cutting depth. For the full rundown of how a beam saw works from load to finished cut, see our guide on what a beam saw is used for.

Castaly 10" CNC Gripper Panel Beam Saw TS-P330 shown in full front-side perspective with automated feeding table

Depth of Cut by Model: A Real Comparison

Here's how maximum depth of cut breaks down across our full Castaly beam saw lineup, alongside the blade diameter behind each spec:

Model Max Depth of Cut Main Blade Feed System Price
TS-P10A 4" 355 mm Variable-speed carriage $34,990
TS-P12A 4" 355 mm Variable-speed carriage $43,989
TS-P10AAT 4" 355 mm Servo pusher (0.002") $72,589
TS-P330 3-1/8" 355 mm CNC servo gripper (0.001") $81,290
TS-P330H Super Duty Not separately listed* — CNC servo gripper (0.001") $91,289
TS-P330R 4-1/2" 405 mm 7-gripper rear-load CNC $153,890

*Castaly's spec sheet for the Super Duty variant doesn't publish a separate maximum cutting thickness figure — the extra horsepower over the standard TS-P330 is built for pushing through dense or laminated stock, not for reaching deeper. If exact depth capacity is the deciding factor on this model, call us and we'll get you the confirmed number before you order.

Castaly 10" CNC Gripper Panel Beam Saw Super Duty TS-P330H shown in full perspective with heavy-duty frame

The Counterintuitive Part: Depth Doesn't Track Price

Notice that our entry-level TS-P10A at $34,990 cuts just as deep as the mid-automation TS-P10AAT at $72,589 — both use the same 355 mm blade, so both top out at 4". More surprising, the CNC gripper-feed TS-P330 at $81,290 actually cuts slightly less deep, at 3-1/8", despite costing more than twice as much as the entry model and offering far tighter feed accuracy. That's because what you're paying for as you move up the lineup is feed automation and positioning accuracy — carriage, to servo pusher, to CNC gripper — not necessarily cutting depth. Only the flagship TS-P330R breaks that pattern, and it does it by stepping up to a genuinely larger 405 mm blade, which is what pushes its depth to 4-1/2". For more on how CNC-driven feed systems work in general, see our guide on how to use a CNC machine for wood.

What Depth of Cut Actually Means for Your Material

Standard sheet goods — plywood, MDF, melamine, particleboard — run 1/4" to 3/4" thick, well within reach of every model on this list with plenty of margin to spare. Depth of cut becomes the deciding factor in a few specific situations: cutting thick countertop-grade material or butcher block panels that can run 1-1/2" to 2" or more, cutting doubled or tripled-up stock in a single pass to save cycle time, or processing engineered products like door blanks and solid-core panels that run thicker than standard sheet goods. If your shop's heaviest material still falls comfortably under 3-1/8", the depth-of-cut spec likely won't be what narrows your decision — feed system and cutting length will matter more. If your shop's volume doesn't call for automated feed at all, a vertical panel saw may cover your material needs with far less investment. If you're regularly running thick stock or stacking cuts, that's when the difference between 3-1/8", 4", and 4-1/2" starts to matter.

Castaly 10" Rear Load CNC Panel Saw TS-P330R heavy-duty cutting carriage and pressure beam assembly

Beam Saw Cut Depth Across the Models Below

The beam saws from our store that the article checks against cut depth are lined up below. Look first at size and feed system, then confirm depth for your material.

Model Price Key feature Best for
Castaly 10"CNC Gripper Panel Beam Saw Super Duty TS-P330H $91,289.00 10 inch CNC gripper beam saw with a 25 HP main motor Large-scale production with heavy, super-duty cutting
Castaly 12" Auto Panel Beam Saw TS-P12A $43,989.00 Variable-speed carriage and hardened guide rods, 12 inch size Cabinet shops that cut full sheets to accurate parts
Castaly 10" Auto Pusher Beam Saw TS-P10AAT $72,589.00 Computer controlled 10 inch saw with high accuracy pusher feed Competitive manufacturing runs of large panels

Line up size, power and feed system in the key feature column, then check each model's cut depth against the thickest material you plan to run.

Beam Saws to Check Against Your Cut Depth

Depth of cut depends on the model, as this article explained, so compare each listed spec with your thickest material. These Castaly models from our store are a good place to start.

1. Castaly 10"CNC Gripper Panel Beam Saw Super Duty TS-P330H — $91,289.00

Looks right when heavy material is on the table, since this super-duty model has a 25 HP main motor and a high-speed automatic gripper. View more >

2. Castaly 12" Auto Panel Beam Saw TS-P12A — $43,989.00

Worth checking for thicker stacks, as this 12 inch automatic beam saw is built for high-accuracy cutting with variable-speed carriage control. View more >

3. Castaly 10" Auto Pusher Beam Saw TS-P10AAT — $72,589.00

Combines computer control with pusher feed for large panels. Compare its cutting depth with the material you plan to run. View more >

Choosing a Beam Saw Based on Depth Needs

If your material never exceeds standard sheet-good thickness, pick based on cutting length, feed automation, and budget — depth of cut won't be a limiting factor at any point in our lineup. If you're cutting thick countertop stock, doubled panels, or solid-core doors regularly, the TS-P10A, TS-P12A, and TS-P10AAT all give you the full 4" of depth at different automation and cutting-length tiers, while the TS-P330R is the only model in the lineup built for material beyond 4", topping out at 4-1/2" thanks to its larger 405 mm blade. Browse the full Beam Saws collection to compare every spec side by side. If you're still deciding between a beam saw and a manually-fed panel saw in the first place, see our beam saw vs. panel saw comparison first.

Castaly 10" Rear Load CNC Panel Saw TS-P330R automated rear loading platform and safety enclosure system

Why Shop Beam Saws With Us

Every depth-of-cut figure above comes straight from Castaly's own spec sheets, not a marketing estimate, so you can compare models on the numbers that actually matter for your material. If your shop's volume doesn't call for a full beam saw yet, see our Panel Saws hub for vertical panel saw and sliding table options as well.

Frequently Asked Questions

How deep does a beam saw cut?

It depends on the model's blade diameter — our Castaly lineup ranges from 3-1/8" to 4-1/2" of maximum depth, with most models built around a 355 mm blade cutting 4" and the flagship TS-P330R stepping up to a 405 mm blade for 4-1/2".

How deep can a beam saw cut through laminated or dense material?

The maximum depth spec applies regardless of material density — a 4" rated saw can plunge 4" into laminated, melamine, or solid-core material the same as softer stock. Motor horsepower affects how cleanly and efficiently it powers through denser material at that depth, not how deep it can reach.

Does a more expensive beam saw cut deeper?

Not necessarily. Depth of cut tracks blade diameter, not price or automation level — our entry-level TS-P10A cuts exactly as deep as models costing twice as much, because they share the same 355 mm blade. Higher-priced models typically buy you feed automation and positioning accuracy, not extra depth.

Can a beam saw cut through stacked or doubled panels in one pass?

Yes, as long as the combined stack thickness stays within the machine's rated depth of cut — a 4" rated model can handle several stacked 3/4" sheets in a single pass, which is a common way shops save cycle time on repeat cuts.

Does Iron Line Tools sell beam saws?

Yes — Iron Line Tools lists a full Castaly beam saw lineup from $34,990 to $153,890, with depth-of-cut specs ranging from 3-1/8" to 4-1/2" depending on the model.

Conclusion

A beam saw's maximum depth of cut depends on the model, not just the price, so check the depth against your material before you choose one. When you are ready to buy, explore our beam saws collection and find the right fit.

Safety and standards references: OSHA 1910.213 woodworking machinery requirements and OSHA 1910.212 general requirements for all machines.

How deep a cut will your sheet goods need?

Share your material and thickness with our team and we will compare each model's reach against it.

888-308-5580

Guides, Panel saws